Services

We service the greater Pennsylvania area stretching from the northern part of the state near Scranton to the greater Philadelphia area to the south. We also service as far west as Pittsburg. 

We have branches in Allentown, Altoona, Harrisburg, Lancaster, Scranton, Williamsport, and York. 

K&D Factory Service Inc. is here to assist you. Please contact us with your questions if you need assistance navigating the numerous manufacturers and parts we carry. It will be our pleasure to assist you.

The four most common causes of commercial oven failure are as follows:

Faulty pilot lights: A pilot light that is not directly in contact with a flame cannot generate enough heat to keep the safety valve open. As a result, the pilot will not stay lit. You will almost certainly need to replace it.

The oven will not reach the desired temperature: All thermostats are factory preset and do not normally require calibration. If your oven does not reach the temperature you have set, the thermostat is either out of calibration, broken or faulty.

Overheating oven: If your oven overheats, it may be due to a thermostat calibration issue. By replacing the thermostat, you will be able to heat your oven to the proper temperature.

Uneven cooking: This is a common issue following the installation of a new thermostat. A heat-sensing bulb that is not properly positioned cannot accurately detect the temperature. Making sure the bulb is in the right place should solve the problem.

K&D Factory Service Inc. is here to help. Contact us with your questions about commercial oven issues today!

K&D Factory Service Inc. provides a wide range of services for your commercial cooking equipment. All of our technicians are factory-trained and certified to repair any type of commercial cooking equipment. 

Not only can K&D repair all types of cooking equipment, but we also have a full department of trained refrigeration and HVAC technicians to take care of your problems before they affect your business. Our technicians have experience with all manufacturers and types of refrigeration equipment, so you will be in good hands with K&D.

K&D has a fully trained parts department to assist you in identifying and obtaining the correct part. K&D can get the parts you need quickly and efficiently with parts specialists in each of our seven branches and an inventory stock of over $1,000,000. If we do not have a part in stock, K&D Factory Service Inc. can order the part you require directly from the manufacturer and have it shipped directly to you or picked up at any of our local branches.

K&D Factory Service Inc. is here to assist you. Get in touch with us right away if you have any problems with your commercial kitchen and refrigeration equipment.