Elizabethtown PA Commercial Refrigeration

Commercial Kitchen Equipment Repair: The client's beer cooler was not maintaining consistent temperatures. After recalibrating the thermostats, the cooler now keeps beverages at the ideal storage temperature.

Commercial Food Processor Repair Service: Addressing a client's concerns with their commercial food processor, I discovered that the blades were no longer spinning effectively due to a malfunctioning motor. A quick replacement of the worn-out motor rejuvenated the appliance, enabling efficient operation once more.

Fountain Machine Installation. I arrived to begin the installation of soda fountain machines for the business. Beyond installation, I calibrated the syrup lines and dispensing mechanisms to perfection, ensuring customers enjoyed refreshingly consistent beverages.

Commercial Steam Kettle Installation. A commercial culinary facility required a new steam kettle for their operations. We assessed their needs, recommended an appropriate model, and carried out a seamless installation, including steam and water line connections. Thorough tests confirmed efficient cooking capabilities for their large-scale recipes.

Commercial Walk-in Freezer Installation Service near Mt Gretna Rd. A restaurant required a new walk-in freezer installation to expand its storage capacity. We carefully assembled the walk-in freezer panels, installed the refrigeration system, and ensured proper insulation. After conducting temperature tests and confirming optimal performance, we handed over a fully functional walk-in freezer to the restaurant owner. They were delighted with the increased storage space for their perishable goods.

Commercial Kitchen Equipment Install near S Market St. After the ice machine at a commercial business failed them, they contacted us for a resolution. We reviewed options with the client, and they decided on the best and most affordable appliance for the business. We arrived at the scheduled date and removed the old ice machine and then installed the new ice machine into the establishment. The client was relieved to have an operable ice machine in the business!

Commercial Kitchen Equipment Repair Service. I arrived at the location and spoke with the customer. The customer stated they had just lit the pilot light for the griddle. Tested for gas leaks from the manifold into each piece of equipment and verified no leaks. Inspected all burner valves and all are in good condition. Good ignition on all burners. The pilot for the oven was not lit. Lit pilot and have good functions. Did find all range top burners that needed cleaning and had debris inside. The customer stated hood had recently been cleaned. Suspect not all pilots relit on the completion of hood cleaning. Pilot flames are all good and good ignition to burners. Unit ok for use.

Arrived at location on 10/22/21 - Arrived, stated unit is dead, not turning on at all. Turned unit on, turned hood on. Checked voltage, traced back through fuses, fuse block. Not getting voltage to power supply board. Traced through up to hood and back down to terminal blocks. While moving wiring and reconnecting terminals, now have voltage to power supply board and unit now turns on. Check ops, functioning correctly. Likely just a loose connection that is now corrected. Ok for use.

Arrived at location on 7/2/21 Spoke with caterers when I arrived and they told me the noise was coming from inside the box. I heard the noise the last time we were here and it was definitely coming from the condenser, which is when we re-strapped the run capacitor for the compressor. Looked inside evaporator and found ice in the drain pan, the bottom of the coil, and the distributor was a block of ice. Thawed everything with hot water. Ran five gallons of hot water down the drain to make sure the drain wasn’t slow or clogged. Went over electrical to make sure there weren’t any loose connections and checked evaporator motors/blades. Returned walk-in back into service and monitored pressures/temperatures. Found box satisfying at exactly 32 degrees. I believe the box set point was too low and when the humidity was high the evaporator wasn’t properly off cycle defrosting, causing the fan blades to strike ice. Adjusted thermostat and monitored operation. System is turning on at 35

JADE RANGE (left) - 4/22/2021 - Michael P A - arrived on site and inspected unit and found all lilots lit. middle burner not lighting off pilot on low setting and barely lighting at higher setting. checked and verified manifold pressure 5wc was good but not properly being passed to burner. bad thermostat. will obtain replacement and return. customer requested QWP approval from will. 4/23/2021- John H - At location with follow up parts for zone 2 from left. I replaced thermostat and tested. I followed instructions given directly from manufacturer to calibrate new gas valve and found bypass unresponsive high or low. Please note zone 2 middle didn't heat outside range while on site but didn't calibrate properly as mfg instructions. I will contact mfg Monday to get further knowledge of grill status..

Found Combi Oven making a popping noise or fluttering sound when igniting. I did pull the burners and found them OK. I did calibrate the exhaust with the flue analyzer. unit now lighting without popping. I checked ops, OK ready to use.

Cleaned Reach-In Cooler condenser coil and evaporator fan shrouds, verified good airflow, checked gaskets and hinges. Both gaskets in poor condition and need replaced, also found discharge loop in poor condition. Customer would like quoted. Unit working at this time, at 34°F.

Found bottom left combi has a leak in the steam generator and the spark is weak causing delayed ignition and popping sound. I will obtain parts and return. Steve said to repair it. I will obtain parts and return. 3/6/20 Did replace the steam generator assembly and burner and module and drain hose. I set co to 9.4% at 71 rpm. I checked ops. OK ready to use.

stated Oven unit displaying F1 error, went into test mode, run blower motor, does not run, remove covers, spin motor by hand, is rough, motor now does turn on through test mode but is very loud. blower motor going out. will order and return. 5/29/19 removed covers from unit, removed old blower motor from unit. install new. reassemble covers onto unit. plug in, turn on, allow to heat, blower now running quietly. check amp draw on heaters and mag circuits. OK on heating circuits. test make product. OK for use.

Installed customer supplied temperature controller for Conveyor Oven. I did match the perimeters with the other control. checked ops. Okay, ready to use. control came from northern pizza equipment 1 800 426 0323 MPI TEMPERATURE CONTROL

Conveyor Oven, bottom temperature controller not working, called factory, Joe will call me back - he is trying to find a replacement controller.

Found Combi-Oven steam hose loose on the back of the steamer. I did secure the steam hose back on the steamer. I did replace a leaking water supply hose. Door gasket is cracked, needs replaced. I checked ops, ran a clean cycle, checked, all heat elements are working, will get new door gasket and return. 3/21/19 Installed a new door gasket. I cleaned glass sealing surface and cleaned up the drip tray. I checked ops. okay, ready to use.

Commercial kitchen equipment maintenance. Found Combi Oven error indicator light on, found the grease filter installed incorrectly. I did reinstall filters and checked ops, okay, ready to use. Found door gasket is very poor condition. Will obtain parts and return 10/30/2018--part ided 11/05/2018 Did replace the door gasket, I checked ops, okay, ready to use

Found motor pick up, speed sensor broken on Conveyor Oven, will obtain parts and return 8-27-18 Arrived, unplugged oven, replaced motor speed sensor. reassembled and plugged back in. turned on, conveyor turns without issues. allow to heat up. okay for use. Also bent ends of master links on chain so they were not sticking up and catching.

Found Combi Oven unit displaying error 40. Checked and found care pump not running fast enough and causing tray to overflow with water. Replaced care pump and test run. Runs good. Advised customer to run through clean cycle at end of day, then error will no longer show up. Unit is okay for use.

Found temperature controller bad on Convection Oven. I did replace the controller and checked ops. Okay, ready to use

Found one contactor coil is bad. Checked voltage to the coil. All OK at 211 volts. Found no ground fault. Checked amp draw on the good coil. Reads .034 amps. Will obtain new contactor and return.*120 volts per leg to ground. 210 across the coil. No sign of any moisture or leaking at contactors. 2-27-2017 Did replace the bad contactor. I checked operation found contactors are getting hot from heat produced from kettle. Coil outside temperature reached 143 deg. in open air. Will contact factory to advise. Also unit lost it's vacuum. Will need safety and bleeder valve. 4-3-2017 Returned, installed contactor upgrade bracket. Mounted contactors. I replaced the pop off valve and the vent. I pulled a vacuum on the kettle. Checked operation. Unit boils. All OK and ready to use.

Found infinite switches bad. I did replace the switches and knobs. Decals need replaced if possible. Will obtain decal pack and return. * No decals available for unit.

Found contactor coils are bad on both contactors. Checked heat element OK. Will obtain parts and return. 1-20-2017 Returned and replaced the heat contactors. Checked operation. Unit draws 68 amps per leg. All OK. Pulled a vacuum on the kettle and checked temperature and pressure and boiled water. All OK and ready to use.

Spoke to customer. He said unit trips the breaker when they put water in the pan to steam. Did check the pan for leaks. Found none. Did find caulking thin around the pan and could see where moisture was getting into the wire way. Did re-caulk around the pan and checked operation. Taped temperature bulb to the pan and replaced missing hardware. Good moisture coming from pan. Unit is getting hot and is ready to use. *Always fill water tray then install into unit. Don't fill water tray while it is in the unit.